Please note:
3° and 5° eccentric shafts extend the range of flow rates from 5 to 1200 l/h.
There are different catalogue numbers for different eccentric shafts. A 3 at the end of the catalouge number represents the 3° eccentric shaft, the 5 stands for the 5° eccentric shaft.

Quattroflow-1200 Single Use with control box

Eccentric shaft: 5° max 1200 l/h
Eccentric shaft: 3° max 800 l/h
Pump chamber, valve plate: Polypropylene virgin (FDA, USP CLASS VI conform)
Motor: 0,37 kW 3-phase , forced cooling fan
Control box: 1-phase 230 V (115 V for US, Japan)
Motor, control box housing: stainless steel 1.4301
3x pump chamber included

Quattroflow-1200 Single Use without control box

Eccentric shaft: 5° max 1200 l/h
Eccentric shaft: 3° max 800 l/h
Pump chamber, valve plate: Polypropylene virgin (FDA, USP CLASS VI conform)
Motor: 0,37 kW 3-phase , forced cooling fan
Motor housing: stainless steel 1.4301
3x pump chamber included

Quattroflow-1200 Single Use - pump head

Eccentric shaft: 5° max 1200 l/h
Eccentric shaft: 3° max 800 l/h
Pump chamber, valve plate: Polypropylene virgin (FDA, USP CLASS VI conform)
Housing: stainless steel
Pressure plate: stainless steel
3x pump chamber included

Quattroflow-1200 Single Use - pump chamber kit

Pump chamber, valve plate: Polypropylene virgin (FDA, USP CLASS VI conform)Connectors standard: 3/4" TC-flange ID 9,4 mm
Gamma sterilisable
3 pieces in a kit

Quattroflow-1200 Single Use - pressure plate
Exchange kit for the Quattroflow-1200 Series

Plate: 10 mm stainless steel with stainless steel screws

Quattroflow-1200 Single Use - drive unit

Eccentric shaft: 5° max 1200 l/h
Eccentric shaft: 3° max 800 l/h
Motor: 0,37 kW 3-phase + forced cooling fan
Motor housing: stainless steel 1.4301

Quattroflow1200 Single Use - ring drive unit

Eccentric shaft: 5° max 1200 l/h
Eccentric shaft: 3° mac 800 l/h
Housing: stainless steel

Quattroflow-1200 Single Use - Pump service kit
Shaft - bearing - cap

Eccentric shaft: 5° max 1200 l/h
Eccentric shaft: 3° max 800 l/h
3x bearings assembled
1x bearing holder
1x bearing cap